2-24
2 - SAFETY BELT
- Sit correctly on the seat.
- Check that the seat belt is not twisted.
- Place the seat belt at hip level.
- Attach the seat belt and check that it locks.
- Adjust the seat belt to your body shape without squeezing your hip and without over-slack.
In no event should the lift truck be used if the seat belt is defective (fixing, locking, cuts, tears, etc.). Repair or replace the seat belt immediately.
3 - IGNITION SWITCH
The key switch has five positions:
P - Ignition off, parking position.
O - Ignition switched off and engine stopped.
I - Ignition on.
II - Heating.
III - The engine starts, and returns to position I as soon as the key is released.
4 - EMERGENCY STOP BUTTON
- In the event of danger, it lets you stop the I.C. Engine and thereby cut out all hydraulic
movements.
- Pull the button to disable it before restarting the lift truck.
Be ready for hydraulic movements suddenly stopping when you press this button.
Warning, when driving, the lift truck will be brought to a sudden stop if actuating the parking brake. If
possible, stop the lift truck before using the emergency stop.
5 - BATTERY CUT-OFF
- For quickly disconnecting the battery when working on the electric circuit or when soldering,
for example.
To Next Page
Loading...
