2-25
6 - MAN-MACHINE INTERFACE (MMI)
6A - DRIVER PRESENCE
6B - INSTRUMENT CONTROL PANEL
6C - PANEL FOR BUTTONS AND KEYBOARD
6D - SCREEN DISPLAY
UPDATED: In order to gain maximum advantage from the Man-Machine
Interface of your lift truck, contact your dealer to receive the most
recent available version of the software.
6A - DRIVER PRESENCE
The driver’s presence is validated when the following are per formed.
1 - The cab door is closed.
2 - The engine is started and the accelerator pedal is pressed.
It is only as from this time that the lift truck will be operational.
When driving (at speeds of less than 3 km/h), as soon as the door is opened and the accelerator is released, the system detects the operator’s absence
and immediately activates the parking brake which may cause a sudden stop for the lift truck.
6B - INSTRUMENT CONTROL PANEL
A - REV COUNTER
B - FUEL LEVEL
When the yellow warning light B1 comes on it means that you are in reserve and that your running time is limited.
C - LONGITUDINAL STABILITY WARNING LIGHT
See: 2 - DESCRIPTION: 7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE.
D - FORWARD/NEUTRAL/REVERSE LIGHT
See: 2 - DESCRIPTION: 20 - FORWARD/NEUTRAL/REVERSE GEAR SELECTION.
E - GREEN STEERING LIGHTS
A continuous beeping sound on and off at the same time as the steering lights when using flashing lights or hazard warning
lights.
F - GREEN WARNING LIGHTS FOR WHEEL ALIGNMENT
See: 2 - DESCRIPTION: 22 - STEERING SELECTION.
G - DIGICODE INDICATOR LAMP
This light flashes when the digicode is enabled (see: 2 - DESCRIPTION: 6D - SCREEN DISPLAY).
6B
6A
6D
6C
A
B
B1
C
D
E
E
F
G
To Next Page
Loading...
