EasyManua.ls Logo

Manitou MT 1440 E3 - Page 58

Manitou MT 1440 E3
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-26
MAJOR FAULT WARNING LIGHT
When this light is on it indicates that there is a major fault that may affect the safety for the lift truck or the driver (see:
2 - DESCRIPTION: 6D - SCREEN DISPLAY).
GREEN LIGHT FOR LOW BEAM
BLUE LIGHT FOR MAIN BEAM
I.C. ENGINE WATER LEVEL AND TEMPERATURE LAMP
COLD ENGINE: If the lamp comes on when the lift truck is running, this means that the coolant level is too low. Immediately
stop the engine and check the coolant level.
HOT ENGINE: If the lamp comes on when the lift truck is running, this means that the coolant temperature is too high.
Immediately stop the engine immediately and seek the cause of the cooling system malfunction.
AIR FILTER CLOGGING LAMP
The lamp comes on when the air filter cartridge is clogged up. When this lamp remains continuously lit, the cartridge needs
changing. Stop the lift truck and carry out the necessar y repairs (see cleaning and replacement requirements in chapter:
3 - MAINTENANCE: SERVICING SCHEDULE).
HYDRAULIC RETURN OIL FILTER CARTRIDGE CLOGGING LAMP
The lamp come on when the hydraulic return oil filter cartridge is clogged up. When this lamp remains continuously lit
the cartridge needs changing. Stop the lift truck and carry out the necessar y repairs (see cleaning and replacement
requirements in chapter: 3 - MAINTENANCE: SERVICING SCHEDULE).
NOTE: This lamp comes on by cold weather or when starting the fork lift truck, it goes off when the hydraulic oil reaches its
operating temperature.
POWER-ASSISTED STEERING FAULT INDICATOR LAMP
If the lamp comes on when the lift truck is running, stop the I.C. engine immediately and look for the cause (possible leak,
etc.).
BRAKE FLUID LEVEL OR POWER-ASSISTED BRAKING FAULT INDICATOR LAMP
If the lamp comes on, when the lift truck is running, stop the I.C. engine immediately and check the braking oil level. In the
event of an abnormal drop in the level, consult your dealer.
WARNING LAMP NOT AVAILABLE
WATER IN FUEL PRE-FILTER LAMP
This lamp will come on when there is water in the fuel pre-filter. Stop the lift truck and carry out the necessary repairs (see:
3 - MAINTENANCE: SERVICING SCHEDULE).
ENGINE PREHEATING LAMP
This lamp comes on when the lift truck’s ignition is switched on and should go out as soon as pre-heating is ended. If it
comes on while the lift truck is in operation, immediately stop the I.C engine and find the cause.
I.C. ENGINE OIL PRESSURE LAMP
If the lamp comes on when the lift truck is running, stop the I.C. engine immediately and look for the cause (see oil level
in I.C. engine crankcase).
I.C. ENGINE PREHEATING FAULT INDICATOR LAMP
If the lamp comes on when the lift truck is running, stop the I.C. engine immediately and look for the cause (possible leak,
etc.).
BATTERY LOAD LAMP
If this lamp comes on when the lift truck is running, switch off the I.C engine immediately and check the electric circuit and
the alternator belt.
GREEN PROGRESSIVE INCHING TRANSMISSION MODE INDICATOR LAMP
This lamp comes on when using the progressive transmission “INCHING” mode (see: 2 - DESCRIPTION: 6C - PANEL FOR
BUTTONS AND KEYBOARD).
GEAR BOX OIL PRESSURE LAMP
This lamp comes on when there is an abnormal drop in gear box pressure. Stop the lift truck and look for the cause (e.g.,
Low oil level in the transmission, internal leak in the transmission, etc.).

Table of Contents

Related product manuals