2-30
LOCKING HYDRAULIC CONTROLS
HYDRAULIC CONTROLS AVAILABLE (by default)
TILT CONTROL LOCKED
HYDRAULIC CONTROLS LOCKED
When driving on the road, it is strongly recommended that you lock all hydraulic movements.
- Press the button to display the other available mode(s), the first screen displayed is the opposite of the enabled mode.
CHANGE MODE
Press
1
2
1
2
Confirm
Cancel
Press
1
2
1
2
Confirm
Cancel
Press
1
2
1
2
Confirm
Cancel
6D - SCREEN DISPLAY
SCREEN OFF
Lift truck parked, with ignition off and without the driver.
MANITOU
LOGO SCREEN
System initialising. A beep is sounded when this screen appears. If the screen remains permanently displayed, contact your
dealer.
DIGIC
0 0 _ _
DIGICODE SCREEN
The digicode is disabled by default. It can be enabled from the OPT menu on the menu screen. A beep is sounded when this screen
appears.
- Switch on the lift truck ignition. Enter the code (default 0000) using the keys on the keyboard and confirm with the confirm button
. Automatically moves to the next character.
To Next Page
Loading...
