18
How to change
filter cartridges
• Rotate the cartridge ¼ turn to the left.
The cartridge should easily release.
Dispose of used cartridge.
– IMPORTANT: Arctic Pure™ system
are equipped with internal shut-off
valves. It is not necessary to shut
off the incoming water supply
during cartridge change out.
• Remove the protective cap from the
cartridge.
• Inspect the cartridge and o-rings for
damage. See sales list when
replacement is required.
• Lubricate o-rings with food grade
lubricant.
• With the product label facing to the left,
insert the cartridge into the filter head.
Rotate 1/4 turn to the right to secure.
The label should be facing forward.
Rotate ¼ turn to left to remove
Rotate ¼ turn to right to install
Troubleshooting
A leak may occur because of
defective tubing. To fix:
• Turn off incoming water supply.
• Release tubing from fitting by
pushing on the collett to
release.
• Cut off at least 3/8” (3.75mm)
from end.
• Reattach tubing, being sure
that connection is snug.
• Turn on water supply.
To Next Page
Loading...
