Manitowoc National Crane 1400A - Page 46

SAFETY INFORMATION 1400A OPERATOR’S MANUAL
2-30
Published 12-21-2012 Control # 103-06
Overload less than 25%
1
Stabilizer
Cylinders
Inspect for leaks.
2
Outrigger
Pads
Inspect for deformation and cracked welds.
Overload from 25% to 49%
1
Stabilizer
Cylinders
Inspect for leaks.
2
Outrigger
Pads
Inspect for deformation and cracked welds.
3
Outrigger
Beams
Inspect for deformation and cracked welds.
4
Outrigger
Boxes
Inspect for deformation and cracked welds.
5 Welds Inspect for cracks.
6 Paint
Inspect for cracked paint which could indicate twisted,
stretched, or compressed members.
Reference Only