MAINTENANCE CHECKLIST OPERATOR MANUAL 600E2
6-14 PUBLISHED 04-26-2019 CONTROL # 113-09
SPECIFICATIONS
Hydraulic Pump
Pump Speed.......................................................................2500 RPM
Displacements:
Section P1..................................................................18 GPM (68.1 LPM) at 3900 psi +100/-000 (26.89 MPa)
Section P2 .................................................................34 GPM (128.7 LPM) at 3300 psi +100/-000 (22.75 MPa)
Section P3..................................................................10 GPM (37.8 LPM) at 2350 psi +100/-000 (16.20 MPa)
Hydraulic System
Requirements:
Boom and Outrigger System ......................................... 18 GPM (68 LPM), 3900 psi +100/-000 (26.89 MPa)
Boom Extend ................................................................ 18 GPM (68 LPM), 2800 psi +50/50 (19.31 MPa)
Boom Retract ................................................................ 18 GPM (68 LPM), 2900 psi +100/-000 (20.00 MPa)
Hoist System ................................................................. 30 GPM (128 LPM), 3300 psi +100/-000 (22.75 MPa)
Turn............................................................................... 10 GPM (38 LPM), 2350 psi +100/-000 (16.20 MPa)
Reservoir
Capacity ........................................................................ 66 Gallons (250 L)
Filtration ........................................................................ 10 Micron Return
Flow rates listed are at free flow condition (approx. 100 psi/ 1 MPa)
HCA
Load charts are based on 3150 psi (21.72 MPa) Constant Pressure (2800 psi (19.31 MPa) Trip Pressure on HCA)
Hoist System Wire Rope ............................................... Standard 325 ft (99 m) of 9/16 “(14.3 mm) diameter,
Rotation Resistant Nominal Breaking Strength ............ 38,500 lb (17,463 kg) 325 ft (99 m) of 9/16 “(14.3 mm)
diameter
Rotation Resistant Nominal Breaking Strength ............ 38,500 lb (17,463 kg)
Hoist Speed and Pull
Layer
Hoist Pull Hoist Speed BOS Hoist Speed Rope Capacity
lbs (kg) fpm (mpm) fpm (mpm) ft (m)
1 10,200 (4527) 111 (34) 157 (48) 64 19
2 9,200 (4173) 123 (38) 173 (53) 136 41
3 8,400 (3810) 135 (41) 190 (58) 215 65
4 7,700 (3493) 147 (45) 207 (63) 301 91
5 7,100 (3221) 159 (49) 224 (68) 394 120
NOTE: All ratings based on 34 GPM at 3300 psi (128.7 LPM at 22.75 MPa)
Burst of Speed maximum pull = 3000 lb (1361 kg)
Fo
r
Reference
Only
To Next Page
Loading...
Need help?
General
