SAFETY INFORMATION NBT40 SERIES OPERATOR MANUAL
2-40
Published 4-23-2018 Control # 239-11
NOTE: If your crane is equipped with CraneSTAR, an
overload warning will be posted to the web site
for review by the crane owner.
Overload warnings do NOT indicate real time
events! Warnings could be sent 24 hours (or
more) after the actual event.
WARNING
Overload Hazard!
To avoid an accident caused by overload damage to
your crane:
• Perform the inspections outlined in this
publication for overloads up to 50%.
• Stop operating the crane and contact Manitowoc
Crane Care immediately for overloads of 50% and
higher.
To Next Page
Loading...
