Manta DVBT010SXT2 User Manual

10
PROBLEM POTENTIAL REASONS WHAT TO DO
Power isn’t connected Connect the power
No picture
The power switch is not on Switch on the power
Not connect DVB-T cable Plug in the DVB-T cable Screen Shows
„No Signal„
Incorrect setting Set up correct parameter
No or incorrect connection with audio cable Connect the audio cable correctly
Mute the sound Switch on the correct, volume control
No sound from speaker
Incorrect sound track Try another sound track
No or incorrect connection with AV cable Connect the video cable correctly Only sound, no Image on
the screen Program is a radio program
Press TV/RADIO key to shift into TV mode
The battery is exhausted Change new battery
Remote control is not
workable
Remote control unit is not in the right opposite of the
front panel or too far from it
Adjust the way of holding remote control unit
and get near to the panel
The image stop
Suddenly or mosaic
The signal i too weak Strengthen the signal
ITEM SUB ITEM PA R AM E T ER
Input Frequency
170-862MHz
FR Input level -20~78 dBm
IF Bandwidth 7MHz
Input Frequency
Modulation QPSK, 16QAM, 64QAM
Decoder Format
MPEG-2(ISO/IEC 13818-2)
MPEG-4(ISO/IEC 14496)
H.264 (ISO/IEC 14496-10)
1080i@30fps
Output Format
4:3,16:9, Letter Box
1920*1080i, 1280*720P, 720*576i
Video
Output Port SCART, HDMI, AUTIO L/R
Decoder Format
MPEG-1&MPEG-2(layer1&layer2)
AAC,AAC+/HE-AAC,AC3
Audio
Audio output Digital audio: S/PDIF
Voltage 100~240V,50~60HZ
Power
POWER Max 6W / standby <0,5W
EN
Troubleshooting
Specification
DVBT010SXT2

Manta DVBT010SXT2 Specifications

General

Brand	Manta
Model	DVBT010SXT2
Category	TV Tuner
Language	English