MM624 – AIR WHEEL
14
12. Then, program buttons on steering wheel and gear
shift to the corresponding function in OPTION of the
game.
13. In some games, force feedback can be set to diffe-
rent degree of different force type. For example, Col-
lision, Road Grip, etc. Try to modiy these setting to
get satisfactory force feeling.
14. In some games, acceleration and brake are congu-
red to buttons. Some can be set to present congu-
ration of Gas and Brake pedals, some cannot. If not,
program the foot pedals to corresponding buttons.
Problems may
encounter
Just after plugging the stering wheel into your computer,
Windows will detect and come up “New hardware is detec-
ted”. Then, install the HID driver according to instructions
on dialog.
If no pop up menu is when the device is rst plugged in.
Please check the following issue.
1. If it is connected to a HUB, try to connect directly to
the computer.
2. If it is already connected to the computer, try another
USB port.
3. Do not plug in inside any running software, particu-
larly inside a game. Do it at root directory.
4. If it is connected during power up of computer, ple-
ase unplug it and plug in again when computer start
up is completed.
You may try to do it manually. Please go to Control Panel
and double click “Add New Hardware”.
Then, follow instructions on the menu.
Setting up Air Wheel for PS3
1. Before power up the PS3,do the following procedure.
USB port
2. Connect up the adapter to the PS2 plug of steering
wheel rst.
3. Make sure the switch „PS3 PC/Xbox”is on „PS3”si
de.
4. Connect the USB plug to your PS3.
5. Press PS button once.C he ck whether Air Wheel is
working.
Notice:
If the Air Wheel is plugged in inside a game,it will be con-
gured not at Port 1 position.Y ou need to set it to Port 1 to
play,un less you want it to be at Port 2.
Press and hold PS button for a while,a black screen will
come up. S elect
Setting up Air Wheel for Xbox
1. Connect up the adapter to the PS2 plug of steering
wheel rst.
2. Make sure the switch „PS3 PC/Xbox”is on „PC/Xbo-
x”si de.
Notice:
The normal function of the product may be disturbed by
Strong Electro Magnetic Interference. If so, simply reset
the product to resume normal operation by following the
instruction manual. In case the function could not resume,
please use the product in other location.
To Next Page
Loading...
Need help?
General
