Manta MSW634 - PC Connectivity and Setup; PC Connection Modes (X-INPUT;D-INPUT); PC Driver Installation and Management

To Next Page

To Previous Page

EN – MSW634

FOR USE WITH XBOX ONE

1. Connect the wheel to XBOX One; and connect the pedal to the wheel, power on XBOX One.

2. Connect the racing wheel to original XBOX One controller by a USB cable, consider the controller as a key to

establish the connection between the controller and racing wheel (the controller need to be power oﬀ).

3. After the connection been established, the RED LED on racing wheel is on, and LED indicator on the controller

also is on. Then, you can start the game.

4. During XBOX One game play, press the HOME button to enter the main menu.

Note: The controller dost not need to be original PS4 controller, it can be third party licensed controller.

FOR USE WITH PC

X-INPUT

1. As default mode when power on, red LED and 1st channel indicator light.

2. Press and hold HOME for 3sec. to switch to D-input, both above LED oﬀ, red LED light again after 0.5sec.

D-INPUT INSTALLATION

3. Start Windows and put the CD into CD-ROM. Double click SETUP and follow on-screen instructions to complete

the driver installation.

4. Connect the wheel to your PC → Start → Control Panel → Device and Printer → right click the device and

printer → Game controller → Properties.

TEST

1. Enter Test interface to test buttons and axis functions.

2. Enter Calibration interface to calibrate the axis.

3. Enter Vibration interface to test axis and pedals.

DRIVER UNINSTALL

1. Start → Control Panel → Programs/Function.

2. Find the driver you want to remove in the Interface” current installed programs”. Click “Remove” and follow the

instructions to get successful uninstall.

TROUBLE SHOOTING

1. If the connection LED is not on, please connect to the controller again and check and controller is working.

2. If the racing wheel do not have an reaction, and the console is stuck, please power oﬀ the console and power

on again.

3. Please re-connect the racing wheel after incorrect operation during the game.

4. Please power oﬀ the original controller before connect the racing wheel to PS4 or XBOX One.

PRECAUTIONS

1. Please read through and familiarize the manual before using this racing wheel.

2. Do not hit, drop or abuse it.

3. Do not disassemble, modify or try to repair by yourself.

4. Do not store it in place that is moist, hot or greasy.