9
BLUETOOTH OPERATION
1. Turn on the unit and press the MODE button on unit or on the remote control to select the Bluetooth function.
The display shows „BLUE”.
2. In Bluetooth mode, the symbol on display will start flashing, the system automatically enters search mode.
3. Activate the Bluetooth feature on the external device to be paired.
4. Initiate a search for devices. The device shows up as „SPK5032”.
5. Select it and enter the password „0000” if required.
6. Press the PLAY button on the unit or the key on remote control, to start playing and the buttons NEXT and PREV,
or the keys and for the selection of songs.
FM RADIO FUNCTION
1. Turn on the unit and press repeatedly the MODE key on unit, or the MODE on remote control and select FM
function (the display will show the frequency).
2. Press the PLAY button on the unit or the key on remote control to activate the auto memory (the radio starts
an automatic search for available radio stations and saves them automatically). The station’s number stored
depends on the radio signal in your area. During the search press PLAY button on the remote control to stop
searching.
3. Use the NEXT and PREV, or the keys and on the remote control to listen to the various radio stations saved in
memory.
4. To change to a preset station, use the number keys on the remote control. For example, to call up the station
number 12, first press 1 and then 2.
TROUBLE SHOOTING
If a problem occurs, follow the steps in the table below. If problems can’t be solved, please contact your retailer.
Problem Possible cause Solution
No sound
when power
is turned on.
1. The power cord is not connected
2. Faulty mains outlet
3. No input source
4. Volume set to minimum
1. Connect the power cord
2. Use an outlet that receives power
3. Connect an input source
4. Set the volume to an appropriate level
Distorted
sound.
1. Master volume is set too high
2. Damaged speaker
1. Reduce the volume
2. Check if the speaker is damaged
No sound
from Karaoke.
1. Microphone plug is not firmly inserted
2. The microphone is not switched on
3. Microphone volume set to the minimum
4. Battery in wireless mic is exhausted
1. Insert the mic firmly into the socket
2. Switch the microphone on
3. Increase the microphone volume
4. Replace the batteries
No sound
from MP3
source.
1. Un supported file format
2. Illegal copy
3. USB/SD source not properly inserted
1. Change into MP3 format
2. Insert the USB/SD source properly
To Next Page
Loading...
