Operating instructios
● Wireless BT Pairing Mode:
Press MODE button on the unit or the remote control until BT is selected.
1). Put the cell phone within 3 meters;
2). Activate the BT features on your cell phone so that the cell phone starts to
search for the BT device. Please refer to the users’ manual for details
3). Select the correct model No. from the device found by the cell phone;
4). For some cell phones, the users have to key in the identification code “0000”
or directly press ENTER key to pair the unit and cell phone.
5). Press RETURN key on the cell phone to exit from the cell phone menu and play
music with the unit when there is no barrier between two cell phones within 10
meters. At this time, you can play music with the unit.
6). Shortly press PLAY/PAUSE button to play or pause music. Short press “” or “”
key to select the previous or next track.
● FM (radio) Mode:
Press MODE button shortly after startup to switch over to “FM” status.
Auto radio station search and storage: Long press on the PLAY/PAUSE button and
the unit will automatically search for radio stations in the radio frequency range
between 87.5 and 108.0MHz. 20 radio stations may be stored. Press a number
button on the remote to access directly a stored radio station.
●LINE IN MODE:
Press MODE button on the unit or the remote control until LINE is selected. Play
the music of the device connected to the LINE input (19) on the rear panel.
● USB Mode:
1. After startup, press MODE to select “USB” and insert the USB device. The unit
will automatically read and play the music in the USB device.
2. Press “” key shortly to pause or play the track.
3. Shortly press “” key to skip to the previous track.
4. Shortly press “” key to skip to the next track.
To Next Page
Loading...
Need help?
General
