Need help?Do you have a question about the Mantall XE100C and is the answer not in the manual?
Defines DANGER, WARNING, CAUTION indicators for hazard communication.
Emphasizes the mandatory use of Personal Fall Protection Equipment (PFPE) for operator safety.
Covers hazards related to the operating environment, such as electrocution and tip-overs.
Details safe clearance distances from electrical power lines to prevent electrocution.
Addresses risks of tipping due to exceeding platform capacity or operating on unstable surfaces.
Warns against operating the machine on slopes exceeding its rated limits.
Reinforces the requirement for wearing and securing Personal Fall Protection Equipment (PFPE).
Advises operators to be aware of sight limitations and potential collision points.
Highlights risks from hydraulic leaks and contact with internal machine components.
Restricts operation and charging in areas with flammable or explosive gases.
Stresses the importance of pre-operation checks and removing damaged machines from service.
Warns operators to keep hands and limbs away from the scissor mechanism.
Outlines the mandatory pre-operation inspection procedures for safe machine use.
Lists specific components and areas to be checked during a pre-operation inspection.
Details the systematic tests required to verify all machine functions before operation.
Provides step-by-step instructions for performing various function tests on the machine.
Explains the function and reset procedure for the emergency stop buttons.
Describes the manual procedure for lowering the platform in case of power failure.
Provides comprehensive instructions for operating the machine from the platform controller.
General| Brand | Mantall |
|---|---|
| Model | XE100C |
| Category | Scissor Lifts |
| Language | English |
To Next Page
