Mantall XE100W - User Manual

CE
Operator’s Manual
Self-Propelled Scissor Lift
XE65N / XE80N / XE80C / XE80W / XE100C / XE100W
XE120W / XE140W / XE160W
Original Instructions
Second Edition
Copyright © Mantall 2016

Summary

3.2.2 Tip-Over Hazards

3.2.3 Operation on Slopes Hazards

3.2.4 Fall Hazards

3.2.5 Collision Hazards

3.2.6 Bodily Injury Hazards

3.2.8 Explosion and Fire Hazards

3.2.9 Damaged Machine Hazards

3.2.10 Crushing Hazards

3.3.2 Explosion Hazards

3.3.4 Electrocution Hazards

3.3.5 Tip-Over Hazards

5.1.2 Functionalities

5.2.2 Functionalities

5.3.2 Functionalities

6 Inspections

6.1 Pre-Operation Inspection

Outlines the importance and steps for pre-operation inspection.

6.1.2 Inspection

6.2 Function Tests

6.2.2 Tests

Details tests for the ground control panel and emergency stop.

6.2.2 Tests

Test the Up;Down Functions

Test the Lowering Safety stop

Tests the automatic stopping function during lowering.

Test the Steering

Test Limited Drive Speed

Verifies drive speed limits when the platform is raised.

Test the Overload Sensor Operation

Tests the overload sensor, alarm, and function lockout.

Test Drive and Braking

Tests the drive and braking functions.

Test the Tilt Sensor Operation

Tests the tilt sensor and its alarm/stopping functions.

Test the Pothole Guards

Tests the deployment and function of pothole guards.

Test Emergency Stop

Tests the emergency stop button on the platform controller.

Test Drive Speed

Test the Function Enable Switch

6.3 Work Place Inspection

7 Operating Instructions

7.2 Emergency Stop

Explains how to use and reset the emergency stop buttons.

7.5 Operation From the Platform

To Position Platform

To Steer

To Drive

Driving On a Slope

Tilt Indicator Light On; Tilt Error Code Shown

Overload Indicator Light On; Overload Error Code Shown

7.6 Extend and Retract the Platform

7.10 Battery and Charger Instructions

7.10.1 To Charge Battery

8 Error Codes (Only for Type B Platform Controller)

9 Lifting Instructions

9.1 Lifting with Forklift

9.2 Lifting with Crane

10 Transport Instructions

10.2 Securing the Machine to a Transport Vehicle

11.3 Check the Batteries

Mantall XE100W Specifications

General

Platform Size	2.27 m x 1.12 m
Drive Type	Electric
Gradeability	25%
Overall Length	2.48 m
Drive Speed	3.5 km/h
Stowed Length	2.48 m