EasyManua.ls Logo

Mantall XE80C - User Manual

Default Icon
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CE
Operator’s Manual
Self-Propelled Scissor Lift
XE65N / XE80N / XE80C / XE80W / XE100C / XE100W
XE120W / XE140W / XE160W
Original Instructions
Second Edition
Copyright © Mantall 2016

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Mantall XE80C and is the answer not in the manual?

Summary

Introduction

Hazard Classification

Defines safety symbols (DANGER, WARNING, CAUTION) for hazard communication.

Safety

Personal Safety

Emphasizes the requirement for Personal Fall Protection Equipment (PFPE).

Work Area Safety

Covers environmental hazards and risks, including electrocution, tip-over, slopes, falls, and collisions.

Battery Safety

General safety precautions for batteries, including explosion and burn hazards.

Controls

Inspections

Pre-Operation Inspection

Importance, fundamentals, and steps for pre-operation checks.

Function Tests

Procedures for testing machine functions before operation.

Work Place Inspection

Assesses workplace suitability and identifies hazards.

Operating Instructions

Emergency Stop

How to use and reset emergency stop buttons.

Emergency Lowering

Manual lowering procedure during power failure.

Error Codes (Only for Type B Platform Controller)

Transport Instructions

Maintenance

Specifications

Mantall XE80C Specifications

General IconGeneral
BrandMantall
ModelXE80C
CategoryScissor Lifts
LanguageEnglish

Related product manuals