2. Remove weight from the platform.
If the the overload indicator light is still on, LCD readout screen shows ”OL” and buzzer alarm on the
Type A platform controller / OL is shown on the display of the type B platform controller and the
buzzer alarm. the load on the platform is more than the maximum allowed load. No functions will
operate. An alarm will sound.
If the platform is still overloaded, the overload indicator light will still on.
7.6 Extend and Retract the Platform
1. Step on the platform extension lock pedal to unlock the platform extension.
2. Grasp the guard rails of the platform extension and push to extend platform to the next position stop.
3. Repeat the previous steps to further extend the platform.
Note: Do not stand on the platform extension while trying to extend it.
CAUTION
Make sure there is enough space to extend the platform or raise the extended platform
without risk of collision.
1. Step on the platform extension lock pedal to unlock the platform extension and pull the platform
extension to retract it to the next position stop.
CAUTION
When retracting the platform extension from its most extended position, take care not
to damage the wiring connector when stepping on the platform extension lock pedal.
To Next Page
Loading...
