Self-Propelled Scissor Lift
Coil failure or coil
disconnected
Check brake valve coil and wiring
Series/parallel valve
coil error
Check DIP switch settings
The machine’s
electrostatic was lost
Change the electrostatic article
Observe and Obey:
• Only qualified personnel should lift the machine.
• Make sure the crane or forklift capacity, loading surfaces and straps or lines are
sufficient to withstand the machine weight. See the Specifications or the serial plate for
the machine weight.
9.1 Lifting with Forklift
Use the designated holes in the chassis to lift the machine using a forklift.
9.2 Lifting with Crane
1. Fully lower the platform to the stowed position. Make sure the extension platform, controls and
covers are secured. Remove all loose items from the machine.
2. Remove the platform controller from the platform guard rails.
To Next Page
Loading...