Mantall XE80C - Safety; Personal Safety; Work Area Safety

Operator’s Manual
Self-Propelled Scissor Lift
Version1
6
3 Safety
3.1 Personal Safety
3.1.1 Personal Fall Protection
Personal fall protection equipment (PFPE) is required when operating this machine.
All PFPE must comply with applicable governmental regulations, and must be inspected and used in
accordance with the manufacturer’s Safety Instructions.
3.2 Work Area Safety
3.2.1 Electrocution Hazards
This machine is not electrically insulated and will not provide protection from contact with or proximity to
electrical current.
Maintain safe distances from electrical power lines and apparatus in accordance with applicable
governmental regulations and the following chart.
Line Voltage
Required Clearance
0 to 300V
Avoid Contact
300V to 50KV
10 ft
3.0 m
50KVto 200KV
15 ft
4.60 m
200KVto 350KV
20 ft
6.10 m
350KVto 500KV
25 ft
7.62 m
500KVto 750KV
35 ft
10.67 m
750KVto 1000KV
45 ft
13.72 m
Allow for platform movement, electrical line sway or sag and beware of strong or gusty winds.
Keep away from the machine if it contacts energized power lines. Personnel on the ground or in the
platform must not touch or operate the machine until energized power lines are shut off.
Do not operate the machine during lightning or stormy weather.
Do not use the machine as a ground for welding.