Mantis COMPACT ComposTumbler CT02001 - STEP 2 - DRUM ASSEMBLY

5
WHAT YOU’LL NEED
Tools: None
Hardware: None
Parts: Item 4 - (1) Endcap
(2) Foam Pads
Drum body assembly (from step 1)
STEP 2 – DRUM ASSEMBLY
1.2
2.1
Alignthembymatchinguptheholesinthens.Fastenthepanelstogetherwiththescrews(1a)andserrated
nuts (1b). Use the regular screwdriver and 3/8” wrench to tighten the nuts.
Remove2foampadspackagedinsideofthecardboardspacerandplacethemontheoor.Placetheendcap(Item4)withthe
“Compact ComposTumbler” lettering facing down—on the pads.
Cardboard Spacer
Foam Pads
Foam Pads