Mantis COMPACT ComposTumbler CT02001 - Drum Assembly; STEP 1 - JOINING THE DRUM PANELS

4
ATTENTION! Your Compact ComposTumbler may be too large to t through some doorways when
assembled. You should build it in a space with easy access to the area where it will be used.
Go to:
Mantis.com/composterhelp
for a step-by-step instruction
video that will have you
composting in no time!
WHAT YOU’LL NEED
Tools: Regular screwdriver
3/8” wrench
Hardware: 1a - (5) 10-32 x 3/8 Machine screw (silver)
 1b-(5)10-32Serratedangelocknut
Parts: Item 1 - (2) Drum panel segments
DRUM ASSEMBLY
STEP 1 – JOINING THE DRUM PANELS
1.1
Placethedrumpanels(item1)onaatsurfacewiththemixingnsfacingup.
Assembly is divided into two major sub-assemblies: Drum and Support Frame.
Mixing Fins