15
2. Turn the 2-way safety button on the lid handle clockwise to align with the arrow mark on the
button with the “Open” indication of the cooker on the console.
3. Inspect the lid so that the vent tube passage is clean and clear from any blockage and also the area around the
Safety Plug is clean inside the lid.
4. Ensure correct fitting of the gasket inside the lid. Now place the lid down on the body in such
a way that the arrow mark on the lid is in line with the arrow mark on the left side body handle.
Press the lid down gently and turn the lid handle clockwise till the lid stops and the lid handle
is in alignment with both the body handles.
5. Move the 2-Way button anticlockwise fully to align the arrow mark on the button with the
“Close” indication of the cooker on the console.
6. Place the pressure regulator on the vent tube in such a way that the steam outlet on the
regulator cowl is away from the lid handle and align the tang to either the low pressure setting
(8 psi) marked as “
”or high pressure setting (12 psi) marked as “
”
on the console depending
on the recipe (please refer the recipe book seperately enclosed). Ensure that the regulator sits
properly, for proper engagement of the regulator with the vent tube with a “click”. Remember,
To Next Page
Loading...