What to do if my Map Coffee Maker stops dispensing coffee?
If your Map Coffee Maker isn't dispensing coffee or is dispensing only a tiny amount, it might be due to incorrect quantity programming. Try reprogramming the quantity associated with the button you're using. Also, ensure you're using only Caffitaly capsules, as non-compatible capsules can cause this issue.
Why is no coffee coming out of my Map Coffee Maker?
If no coffee comes out and the warning light D on your Map Coffee Maker is blinking red, it could be due to an empty water tank. Fill the tank with fresh water and press a button to refill the circuit. The appliance is ready when the buttons remain steadily lit. Another cause could be an interruption in the water flow, in which case you should remove the capsule from the chamber.
How to fix the lever on my Map Coffee Maker if it won't lower?
If the lever on your Map Coffee Maker cannot be lowered, it's likely that the used capsule drawer is full. Empty the used capsule drawer to resolve this. Alternatively, a capsule might be stuck inside the machine; remove the used capsule.
Why is my coffee not hot enough from my Map S12 Velocissimo Coffee Maker?
If your coffee from the Map Coffee Maker is not hot enough, it could be due to cold cups. Preheat your cup before brewing. Another possible reason is scale build-up in the machine, so descale your machine.
General| Brand | Map |
|---|---|
| Model | S12 Velocissimo |
| Category | Coffee Maker |
| Language | English |
Explains the meaning of warning and note symbols used in the manual.
Provides contact details for customer support in Australia and New Zealand.
Lists essential safety precautions to prevent injury and appliance damage.
Details guidelines for proper appliance usage and environmentally friendly disposal.
Outlines the procedure for initial setup and restarting after inactivity.
Explains the steps to power on the coffee machine and its readiness status.
Covers machine status indicators like descaling signals and water level alerts.
Describes how to adjust the dispensing spout for different cup sizes.
Explains the function of each button for dispensing coffee and other beverages.
Details the step-by-step process for brewing coffee using capsules.
Guides users on how to set custom coffee volume for each button.
Explains the automatic energy-saving feature for reducing power consumption.
Provides instructions for routine cleaning of the drip tray, capsule drawer, and water tank.
Details the procedure for descaling the machine to maintain performance and longevity.
Offers solutions for common issues encountered with the coffee machine.
Lists technical specifications and compliance information for the appliance.
Outlines the procedure for initial setup and restarting after inactivity.
Explains the steps to power on the coffee machine and its readiness status.
Explains the indicator for when descaling is required.
Describes the button blinking pattern during the machine's heating phase.
Instructions for refilling the water tank when it empties during operation.
Warns about hazards and procedures if the lever is lifted during beverage dispensing.
Guides users on how to set custom coffee volume for each button.
To Next Page
