Need help?Do you have a question about the Marantz 6300 and is the answer not in the manual?
Explains the automatic operation sequence, including cue-down, cue-up, and auto-shutoff functions.
Details how switching to manual mode affects the turntable's circuit operation.
Provides steps for verifying and fine-tuning the automatic shut-off mechanism's performance.
Guides on setting up the tone arm, including stylus overhang, balance, tracking force, and anti-skating.
Presents the detailed electrical schematic for the US and Canadian versions.
Provides the electrical schematic specific to the European model of the turntable.
Explains the automatic operation sequence, including cue-down, cue-up, and auto-shutoff functions.
Details how switching to manual mode affects the turntable's circuit operation.
Provides steps for verifying and fine-tuning the automatic shut-off mechanism's performance.
Guides on setting up the tone arm, including stylus overhang, balance, tracking force, and anti-skating.
Presents the detailed electrical schematic for the US and Canadian versions.
Provides the electrical schematic specific to the European model of the turntable.
General| Drive System | Belt drive |
|---|---|
| Speed | 33 1/3 and 45 rpm |
| Signal to Noise Ratio | 70 dB |
| Overhang | 15 mm |
| Cartridge | Not included |
| Motor | AC synchronous |
| Platter | Die-cast aluminum |
| Tonearm | Static balance type |
| Type | Manual |
| Cartridge weight range | 4-10 grams |
| Wow and Flutter | 0.03% WRMS |
To Next Page
