o
Power On Volume
Define the volume setting that is active when the power is turned on.
Last
(Default):
Use the memorized setting from the last
session.
Mute: Always use the muting on condition.
1 – 98
(–79.5 dB – 18.0 dB):
The volume is adjusted to the set level.
This can be set when “Volume Level” is set to “Variable”. (v p. 243)
o
Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
The sound is muted entirely.
–40 dB : The sound is attenuated by 40 dB down.
–20 dB : The sound is attenuated by 20 dB down.
Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2 / ZONE3
Set Defaults: The default setting is restored for the edited zone name.
Up to 10 characters can be input.
For character input, see “Using the keyboard screen” (
v
p. 173).
Smart Select Names
Change the smart select name that appears on the TV screen to one you
prefer.
Smart Select 1 / Smart Select 2 / Smart Select 3 / Smart Select 4
Set Defaults:
The default setting is restored for the edited smart select
name.
Up to 16 characters can be input.
For character input, see “Using the keyboard screen” (
v
p. 173).
Contents Connections Playback Settings Tips Appendix
244
Front panel Display Rear panel Remote Index
To Next Page
Loading...
