To Next Page
L
lisamasonAug 8, 2025
What to do if Marantz ST6003 power does not turn on?
- MMary DeanAug 8, 2025
If the power does not turn on when you press the POWER ON/STANDBY switch, make sure the mains cord is properly plugged into the wall outlet.
What to do if Marantz ST6003 power does not turn on?
If the power does not turn on when you press the POWER ON/STANDBY switch, make sure the mains cord is properly plugged into the wall outlet.
Why is there hissing noise on Marantz Tuner FM broadcasts and how to fix it?
Hissing on FM broadcasts can occur if the antenna cable is not properly connected, the antenna isn't pointing in the right direction, or the radio waves are weak. To resolve this: * Ensure the leads are properly connected. * Point the antenna in the correct direction. * Consider installing an outdoor antenna if the signal is weak.
Why is there hissing or buzzing sound on Marantz Tuner AM broadcasts and what to do?
Hissing or buzzing sounds during AM broadcasts can be due to noise from a TV or interference from the broadcast station's signals. Try turning off the TV, changing the position of the loop antenna, or installing an outdoor antenna.
Why is there booming sound in Marantz Tuner AM broadcasts, and how to resolve it?
A booming (humming) sound in AM broadcasts can occur when signals transmitted over the main cord are modulated by the power source frequency. You can try inserting the plug in the opposite direction or installing an outdoor antenna.
General| Frequency range | 87.5 - 180 MHz |
|---|---|
| Selectivity | 60 dB |
| RDS features | PS, PTY, RT |
| Product color | Gold, Silver |
| Supported radio bands | AM, FM |
| Radio Data System (RDS) | Yes |
| Preset stations quantity | 50 |
| Signal-to-Noise Ratio (SNR) | 70 dB |
| Total Harmonic Distortion (THD) | 0.2 % |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 9 W |
| Remote control in | 1 |
Weight and Dimensions| Depth | 341 mm |
|---|---|
| Width | 440 mm |
| Height | 104.5 mm |
| Weight | 4100 g |
Keep purchase receipt for records and insurance purposes.
Consumer responsibility to establish proof of purchase for warranty service.
Undertaking is in addition to statutory consumer rights.
States compliance with EMC and low-voltage directives for the ST6003.
Important safety precautions for operation and placement of the equipment.
List of included accessories with the product package.
Details specific functionalities like preset memory, sleep timer, and RDS.
Covers pre-operation checks, settings, warnings, and placement guidelines.
Identifies and explains the buttons and indicators on the front of the tuner.
Explains the meaning of various indicators shown on the front display.
Details the connectors and ports available on the rear of the unit.
Instructions for connecting the tuner to a Marantz stereo or AV amplifier.
Guides on connecting antennas, assembling the AM loop, and the AC power cable.
Steps to power on the unit and begin listening to radio stations.
Covers auto tuning, manual tuning, and preset memory management.
Covers recalling, sorting, clearing, and naming preset stations.
Explains RDS display, PTY display, and PTY auto search functions.
Instructions for setting the automatic standby sleep timer.
How to connect the unit to a Marantz amplifier for remote control.
Details the functions of buttons on the Marantz remote control.
Table of symptoms, causes, and remedies for operational issues.
How to lock/unlock front panel buttons and reset the unit to defaults.
Detailed technical data and specifications for the tuner.
Instructions on how to clean the unit's exterior surfaces.
Guidance on servicing and obtaining repairs for the equipment.
