Need help?Do you have a question about the Marantz ST-17 and is the answer not in the manual?
General| Type | Stereo Tuner |
|---|---|
| FM Tuning Range | 87.5 - 108 MHz |
| MW Tuning Range | 522 - 1611 kHz |
| Weight | 5.5 kg |
| Signal to Noise Ratio | 50 dB (MW) |
| Distortion | 0.3% (FM) |
| Total Harmonic Distortion | 0.1% (FM) |
| Frequency Response | 20Hz to 15kHz |
| Output | Fixed |
| Output Level | 775 mV |
Your purchase receipt is your permanent record of a valuable purchase. Keep it safe for insurance or correspondence.
Statement confirming the ST-17's conformity with EMC and low-voltage directives.
Essential safety precautions to prevent damage or injury, such as avoiding moisture and not removing covers.
Guidelines for setting up the unit correctly, including voltage selection and plug suitability.
Instructions for connecting the mains plug, including wire color codes and fuse requirements.
Notes on consent required for recording and playback of material under copyright laws.
Explanation of how to use the user guide, referencing callout numbers and bold text for controls.
Precautions for installation and operation, including ventilation, stable surface, and avoiding external interference.
Details on connecting antennas (FM/AM) and other audio equipment to the rear panel terminals.
Instructions for AC power connection, scan-step selection, and FM de-emphasis switch.
Details on buttons for power, antenna selection, IF band, mono/stereo modes, and band selection.
Explanation of the MEMO, DISPLAY, and ST-NAME buttons for station presets and naming.
Information on buttons for PRESET, TUNING, and AUTO modes, and the GYRO CONTROL RING.
Description of various indicators on the display such as MEMORY, PRESET, STEREO, TUNED, and station names.
Basic operation for powering the unit on/off and selecting wave bands (FM, MW, LW).
Procedure for automatically tuning to stations using the GYRO CONTROL ring.
Procedure for manually tuning to desired frequencies using the GYRO CONTROL ring.
Instructions for recalling preset stations and managing the preset memory system.
Guide for manually inputting station names for RDS and non-RDS stations using the main unit.
Overview of buttons on the remote control unit for tuning, presets, and station name input.
Step-by-step guide to presetting frequencies and recalling stations using the MEMO and PRESET buttons.
Detailed instructions for inputting station names using the remote control unit's numeric buttons.
Procedure to erase stored station presets and their names from memory.
Guidelines for using the remote control effectively, including distance and aiming.
Instructions for loading the battery and important safety cautions regarding battery usage.
Procedure for enabling system control via the REMOTE CONTROL terminal for integrated Marantz equipment.
Description of controls on the system remote for operating the ST-17 as part of a system.
Instructions for cleaning external surfaces and general care to optimize equipment operation.
Guidance on diagnosing and resolving common problems like no power, no broadcast sound, or poor reception.
Detailed technical specifications for the FM tuner, including sensitivity, distortion, and stereo separation.
Technical specifications for the AM tuner, covering sensitivity, signal-to-noise ratio, and distortion.
General specifications including power requirements, power consumption, dimensions, and weight.
To Next Page
