1
Press and hold down the input source button that you
want to register the preset code to and SETUP until the
DEV., TV and AVP indicators are flashing green.
2
Enter the preset number (4 digits) listed for the device
in the Preset Code Table using the number buttons (0 –
9) on the remote control.
0
Some manufacturers use more than one type of preset code. Preset codes to
change the number and verify correct operation.
NOTE
0
Depending on the model and year of manufacture of your device, some buttons
may not operate.
Contents Connections Playback Settings Tips Appendix
261
Front panel Display Rear panel Remote Index
To Next Page
Loading...
