Need help?Do you have a question about the Marantz AV8805 and is the answer not in the manual?
General| Channels | 13.2 |
|---|---|
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Auro-3D | Yes |
| HDMI Inputs | 8 |
| HDMI Outputs | 3 |
| 4K Ultra HD | Yes |
| HDR10 | Yes |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| HEOS Multi-room | Yes |
| Type | AV Pre-Amplifier |
| IMAX Enhanced | Yes |
| HDR Support | HDR10, Dolby Vision, HLG |
| 4K/60Hz Pass-through | Yes |
| 8K/60Hz Pass-Through | No |
| eARC | Yes |
| Audyssey MultEQ XT32 | Yes |
| Analog Audio Inputs | 7 |
| USB | 1 (Front) |
| Ethernet | Yes |
| Audio Channels | 13.2 |
| Power Output | N/A (Pre-Amplifier) |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.005% |
| Weight | 30.9 lbs |
| Voice Control | Yes |
| Digital Audio Inputs | 2 Optical, 2 Coaxial |
| Inputs | HDMI, USB, Optical, Coaxial, Analog |
| Outputs | HDMI |
| Supported Audio Formats | FLAC, ALAC, WAV, MP3, AAC |
| Video Support | 4K/60Hz, HDR10, Dolby Vision, HLG |
| Phono Input | Yes (MM) |
Covers amplifier circuit, Dolby Atmos, DTS:X, DTS Virtual:X, and IMAX Enhanced audio features.
Explains the Auro-3D decoder for immersive, three-dimensional sound.
Highlights 4K 60Hz support, HDR, BT.2020 color, and HDCP 2.2 compatibility.
Details HDMI connectivity, eARC function, and AirPlay/AirPlay 2 support.
Describes the step-by-step setup instructions for speakers and network configuration.
Details the various audio and video input/output connectors on the rear panel.
Identifies the terminals for connecting speakers for different configurations.
Details operation buttons such as AVP, SET, and ZONE SELECT for controlling the unit.
Guides placement of front left and right speakers for optimal sound.
Provides essential preparatory steps before connecting a power amplifier.
Details configurations like 5.1, 7.1, 9.1 channels and bi-amp connections.
Details the speaker layout and connections for Auro-3D 9.1-channel playback.
Table detailing speaker combinations and corresponding PRE OUT connector assignments.
Shows connection examples for 15.1-channel Dolby Atmos and Auro-3D playback.
Guides TV connection based on HDMI presence and ARC/eARC compatibility.
Details connecting a TV with HDMI and ARC/eARC for audio return.
Explains how to turn the unit on, off, or switch to standby mode.
Guides on selecting the desired input source for audio or video playback.
Guides on pairing a Bluetooth device with the unit for music streaming.
Details how to tune stations manually, automatically, and preset them.
Explains how to browse and select stations from the TuneIn Internet Radio service.
Explains AirPlay for streaming from Apple devices and AirPlay 2 for synchronized playback.
Explains how to play Spotify music by connecting device to the same network.
Details playing music simultaneously in multiple zones using All Zone Stereo.
Explains Direct and Pure Direct modes for pristine audio playback.
Provides details on various Dolby, DTS, Auro-3D, and other sound modes.
Shows selectable sound modes for 2-channel input signals based on button presses.
Displays selectable sound modes for multi-channel input signals like Dolby Digital, DTS.
Outlines the steps to enable HDMI Control for linked device operation.
Explains ARC and eARC functions for TV audio return via HDMI.
Explains how to set the timer for automatic standby.
Explains how to register input source, volume, and sound mode settings.
Details connecting ZONE2/ZONE3 using the HDMI ZONE2 OUT connector.
Details input assignments and speaker configuration settings.
Lists general settings, system updates, and guided setup assistance.
Solves sound quality issues at low volumes by adjusting frequency response.
Automatically adjusts volume for consistent listening levels across content.
Allows adjustment of picture quality parameters like contrast, brightness, and sharpness.
Guides selecting picture modes (Standard, Movie, Vivid, etc.) for viewing environments.
Selects HDMI audio output destination (AVP or TV).
Enables linked operation with HDMI Control compatible devices.
Selects the HDMI monitor connector (Monitor 1, Monitor 2) for video output.
Allows assignment of input connectors (HDMI, Digital, Analog, etc.) to input sources.
Guides performing room acoustic measurements for speaker optimization.
Allows manual configuration of speaker settings if Audyssey setup is skipped.
Details Pre Amplifier assignments for various speaker configurations like Bi-Amp.
Covers configuration for height speakers and Dolby Atmos Enabled speakers.
Guides measuring and setting distances from listening position to each speaker.
Explains adjusting speaker volume using test tones for balanced output.
Selects between wired LAN (Ethernet) or wireless LAN (Wi-Fi) connection.
Provides instructions for connecting to a wireless LAN router.
Guides on signing in with an existing HEOS account or creating a new one.
Provides solutions for common problems like no power, no sound, display, and connection errors.
Details audio output channels and surround parameters for various sound modes.
Adjusts dynamic range, dialog volume, and low frequency effects for optimal audio.
To Next Page
