Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Subwoofer Level Adjust Adjusts the subwoofer channel volume for all input sources. 183
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 183
Surround Parameter Adjusts surround sound parameters. 184
M-DAX Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
189
Audio Delay Compensates for incorrect timing between video and audio. 190
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 191
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
and Audyssey LFC
TM
settings.
192
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 195
.
Video
Picture Adjust Adjusts picture quality. 197
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 199
Output Settings Makes settings for video output. 204
Analog Video Out Selects the zone that uses component video output and video output. 208
On Screen Display Configures the on-screen display settings. 208
4K Signal Format Set the 4K signal format when the TV or playback device is 4K compatible. 209
TV Format Sets the video signal format to be output for the TV you are using. 211
Contents Connections Playback Settings Tips Appendix
178
Front panel Display Rear panel Remote Index
To Next Page
Loading...
