Need help?Do you have a question about the Marantz AMP10 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Rated Output Power (4 Ohm) | 400W per channel |
| Input Sensitivity | 1.2V |
| Amplifier Class | Class D |
| Standby Power Consumption | 0.2W |
| Frequency Response | 5 Hz - 50 kHz |
| Total Harmonic Distortion | 0.005% |
| Damping Factor | 100 |
| Input Impedance | 47 kOhm |
| Dimensions | 17.3 x 18 inches |
| Power Output | 200W per channel (8 Ohms, 20Hz-20kHz, 0.05% THD) |
| Weight | 47 lbs |
Details the amplifier's audio quality aspects, including its power module and components.
Explains performance features like input options, BI-AMP/BTL connections, and control functions.
Identifies and illustrates the components on the front panel of the amplifier.
Identifies and illustrates the connectors and controls on the rear panel.
Initial setup steps, including connecting speakers and preamplifiers.
Illustrates different ways to connect speakers for various channel configurations.
Provides detailed instructions on how to connect a preamplifier using RCA or XLR.
Details bi-amp and BTL connection methods for powering speakers.
Connects external devices via AMP CONTROL, REMOTE CONTROL, FLASHER IN, and DC CONTROL jacks for linked operation.
Covers setting the auto standby function and connecting the power cord.
Covers powering the unit on and putting it into standby mode.
Explains how to control the level meter display and illumination brightness.
Provides initial checks and guidance for resolving operational problems.
Addresses scenarios where the unit won't turn on, turns off, or produces no sound.
Defines speaker impedance and its effect on amplifier output.
Explains the protective function that prevents damage from abnormalities.
Provides detailed physical measurements of the amplifier unit.
States the weight of the amplifier unit.
To Next Page
