Marantz AMP10 - Specifications

Specifications
Rated output: Normal, BI-AMP
200 W x 2 (8 Ω/ohms load, 1kHz, T.H.D. 0.05 %)
400 W x 2 (4 Ω/ohms load, 1kHz, T.H.D. 0.7 %)
BTL
400 W x 2 (8 Ω/ohms load, 1kHz, T.H.D. 0.05 %)
Output connectors: 4 – 16 Ω/ohms (Normal, BI-AMP)
8 – 16 Ω/ohms (BTL)
Frequency response (1 W, 8 Ω): 5 Hz – 70 kHz ±3 dB
Input sensitivity/impedance: 1.4 V / 47 kΩ/kohms (UNBALANCED)
2.8 V / 100 kΩ/kohms (BALANCED)
Signal-to-noise ratio (IHF-A): 110 dB
Voltage amplification level: 29 dB
Power supply: AC 120 V, 60 Hz
Power consumption: 500 W
Power consumption in standby mode: 0.2 W
For purposes of improvement, specifications and design are subject to change without notice.
Contents
Connections Playback Tips Appendix Specifications
35
Front panel Rear panel Index