Need help?Do you have a question about the Marantz PM6004 and is the answer not in the manual?
General| Damping factor | 100 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 70000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 87 dB |
| Total Harmonic Distortion (THD) | 0.0008 % |
| RMS power output per channel (4 Ohm) | 60 W |
| RMS power output per channel (8 Ohm) | 45 W |
| AC (power) in | Yes |
| Audio (L/R) in | 6 |
| Audio (L/R) out | 2 |
| Headphone outputs | 1 |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Gold, Silver |
| Connectivity technology | Wired |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 150 W |
Weight and Dimensions| Depth | 366 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 7500 g |
Lists 15 essential safety instructions for operating the apparatus safely and preventing hazards.
Warns against opening the product, exposing it to moisture/rain, and touching hot surfaces.
Details FCC regulations, notices, and compliance for US and Canadian customers.
Lists warnings for temperature, cord handling, moisture, ventilation, foreign objects, and chemicals.
Advises on proper installation for heat dispersal, space requirements, and avoiding placing items on the unit.
Lists the essential accessories provided with the Marantz PM6004 unit.
Explains the manual's layout, symbols, and illustration disclaimers.
Encourages reading the manual for proper operation and keeping it for future reference.
Highlights discrete current feedback amplifier, high-power output, and quality audio design.
Covers PHONO input, dual speaker terminals, and wireless remote control capabilities.
Explains Tone Control and LOUDNESS functions for user-defined sound profiles.
Covers pre-operation checks, power safety, condensation, moving, and mobile phone interference.
Guides on battery installation, operation range, and sensor considerations.
Identifies and explains the functions of all front panel buttons, knobs, and indicators.
Identifies and explains the purpose of all rear panel input/output connectors and terminals.
Clarifies the usage conditions for Bass, Treble, and Balance controls, dependent on the Source Direct switch.
Identifies all buttons on the remote and their primary functions for various operations.
Explains how to switch between operating the unit and other Marantz audio components.
Lists the mapping between unit input terminals and remote control input selector buttons.
Provides important reminders before making connections, including power and cable handling.
Details connecting audio cables, handling SA sources, and connecting speakers.
Step-by-step guide to preparing speaker cables and inserting them into terminals.
Explains the protection circuit, its triggers, and troubleshooting steps.
Describes connecting speakers to terminals A/B and lists speaker impedance recommendations.
Guides on connecting turntables, CD players, and tuners, including ground wire advice.
Illustrates connections for Marantz CD-R and MD/TAPE recorders.
Instructions for connecting the power cord after all other connections are finalized.
Covers turning volume down, powering on, standby mode, and powering off the unit.
Notes on standby power consumption and advice for extended periods of non-use.
Guides through selecting input, speakers, starting playback, and adjusting volume.
Explains Tone Control, LOUDNESS, and Muting functions for audio adjustment.
Details Direct playback and headphone usage, including turning off speaker output.
Outlines the steps required to start recording audio sources.
Guides on connecting Marantz components for synchronized control via remote jacks.
Explains the purpose of the flasher input jack for remote control from a different room.
Guides on disabling and enabling the unit's remote sensor function.
Explains how to set and confirm remote control codes for the main unit.
Details how to assign codes (AMP1, AMP2, AMP3) to the remote and restore defaults.
Explains the unit's automatic entry into standby after 30 minutes of no output.
Details how to enable or disable the Auto standby mode using the SOURCE DIRECT button.
Provides a checklist of initial checks for common problems before seeking service.
A table detailing common symptoms, their causes, countermeasures, and reference pages.
Lists detailed technical data including power output, distortion, frequency response, and input sensitivity.
Details power requirements, consumption, and unit weight.
Explains important terms like Protection Circuit and Speaker Impedance.
Shows the physical dimensions of the Marantz PM6004 in inches and millimeters.
States the weight of the Marantz PM6004 unit.
Details the 3-year and 90-day warranty periods for different Marantz products in Canada.
Outlines how to get service, what Marantz pays for, and required proof of purchase.
Explains limitations on implied warranties, exclusions of damages, and provincial rights.
Details Marantz's warranty periods and who can enforce it in the USA.
Outlines how to get service, Marantz's payment coverage, and proof of purchase requirements.
Explains limitations on implied warranties, damage exclusions, and state-specific rights.
To Next Page
