Need help?Do you have a question about the Marantz PM6005 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Frequency range | 10 - 70000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 60 W |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| RMS power output per channel (8 Ohm) | 45 W |
| AC (power) in | Yes |
| Audio (L/R) in | 5 |
| Audio (L/R) out | 1 |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 155 W |
Weight and Dimensions| Depth | 370 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 7600 g |
Describes the unit's high-quality sound features, including amplifier circuit and audio design.
Details the unit's high-performance aspects, such as digital inputs and tone control.
Covers the ease of use, including remote compatibility with other Marantz devices.
Identifies and explains the controls and indicators on the front panel of the amplifier.
Details the various input/output connectors and jacks found on the rear panel.
Explains the functions of the remote control unit and its different operating modes.
Provides instructions on how to connect speakers, including impedance considerations.
Guides users on connecting turntables, tuners, CD players, and network audio players.
Explains how to connect a recording device to the unit for recording purposes.
Details how to connect TVs or other devices using digital audio inputs.
Covers connecting other Marantz devices via remote control connectors for integrated operation.
Provides instructions for connecting the power cord to the unit and AC outlets.
Instructions on how to power the unit on and off, including standby mode.
Guides on selecting which speaker set (A or B) is used for audio playback.
Explains how to choose the desired audio input source for playback.
Instructions on how to adjust the audio volume level using the unit or remote.
How to mute the audio output temporarily using the mute function.
Details how to adjust bass, treble, and balance for desired sound characteristics.
Steps for playing music from a CD using the unit.
Information on how to start the recording process.
Instructions to configure the unit's automatic standby mode to save power.
Explains how to enable or disable the unit's IR receiver for remote control.
Guides on setting different remote control codes for independent operation of multiple units.
Addresses issues related to the unit not powering on or turning off unexpectedly.
Solves problems where the unit turns off with a flashing red power indicator.
Provides solutions for when the remote control unit is not working correctly.
Offers steps to resolve issues where no sound is produced by the speakers.
Helps users troubleshoot when the audio output does not match expectations.
Provides solutions for audio interruptions or unwanted noise during playback.
Explains playback options for devices utilizing digital audio connections.
Defines key technical terms used in the manual, such as protection circuit and sampling frequency.
To Next Page
