Marantz PM6005 - Selecting the speakers for audio output; Selecting the input source; Adjusting the volume; Turning off the sound temporarily

25
Appendix
TipsSettingsConnections
Contents
Front panel Rear panel IndexRemote
Playback
Adjusting the volume
1
Use VOLUME df to adjust the volume.
%
• You can also adjust the volume by turning VOLUME on the main unit.
Turning o the sound temporarily
1
Press MUTE .
The mute indicator lights.
%
• Muting can be cancelled by pressing MUTE
again.
Adjusting the tone
1
Press SOURCE DIRECT on this unit to turn o source
direct mode.
2
Turn the BASS, TREBLE and BALANCE control knobs to
adjust the tone.
Selecting the speakers for audio output
1
Press SPEAKERS A/B to select the speaker system to be
used for playback.
The indicator of the selected speakers lights.
Selecting the input source
1
Press the input source select button to be played back.
The indicator of the selected input source lights.
%
• You can also select the input source by turning INPUT SELECTOR on the main unit.