Troubleshooting
If a problem occurs, first check the following:
1. Are the connections correct?
2. Is the unit being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. If the problem persist there may be a malfunction.
In that case, disconnect the power immediately and contact your retail outlet.
2 Power does not turn on / Power is turned o
Symptom Cause / Solution Page
Power does not turn on. • Check whether the power plug is correctly inserted into the power outlet.
22
Power automatically turns o. • The Auto Standby mode is set. The Auto Standby mode switches the unit to standby mode
when the unit is not operated for approximately 30 minutes. To disable the Auto Standby
mode, press and hold the SOURCE DIRECT button on the unit for more than 5 seconds when
the Auto Standby mode is enabled.
29
To Next Page
Loading...
