Need help?Do you have a question about the Marantz DIGITAL PM630 and is the answer not in the manual?
Connect the Line outputs of your tuner to this terminal.
Connect a turntable with a magnetic phono cartridge.
Connect high-level signal sources like tape players or TV.
Connect tape recorders or graphic equalizer for recording/dubbing.
Output terminal for connection to a power amplifier's input.
Input terminal for connection to a preamplifier's output.
Connect Marantz components for simplified, automatic source selection.
Connect components for remote control operation via R.C. bus cable.
Connect two pairs of loudspeakers using appropriate gauge cable.
Connect the unit to the mains supply using the provided AC line cord.
Turns the unit on and off.
Selects program sources for recording or dubbing.
Selects the desired program source for playback.
Selects between MM and MC phono cartridges.
Adjusts the audio volume level.
Temporarily reduces the amplifier output volume.
Adjusts the electronic volume in 2 dB steps.
Stores and recalls up to 3 absolute or relative volume levels.
Monitors signals from connected tape decks or video equipment.
Monitors signals from the Tape 2/EQ connections.
Boosts bass and treble at low volumes for better tonal balance.
Adjusts the left and right channel output levels.
Engages the monaural playback mode.
Facilitates recording or dubbing between two tape decks.
Eliminates noise from record scratches or AM broadcasts.
Reduces turntable and low frequency noise.
Adjusts the treble and bass frequencies for desired sound.
Selects or enables one or both pairs of connected speakers.
Connects headphones, cutting off speaker output.
Instructions for playing vinyl records, including cartridge selection and tone adjustment.
Steps for tuning and listening to radio stations.
How to play back tapes using connected cassette decks.
Procedures for recording audio from various sources onto tape.
Monitor recording progress with 3-head tape decks.
Instructions for copying audio between tape decks.
Integrates Marantz components for automatic system operation.
Enables remote control of main unit functions via a bus system.
To Next Page
General
