Do you have a question about the Marantz MA-9S2 and is the answer not in the manual?
Procedure for adjusting the DC offset voltage of the amplifier's speaker outputs.
Procedure for adjusting the amplifier's idling current for power transistors.
Procedure to set speaker output voltage level using a meter and oscillator.
Visual representation and list of parts for the amplifier's physical assembly.
Comprehensive list of electrical components with part numbers and descriptions.
Procedure for adjusting the DC offset voltage of the amplifier's speaker outputs.
Procedure for adjusting the amplifier's idling current for power transistors.
Procedure to set speaker output voltage level using a meter and oscillator.
Visual representation and list of parts for the amplifier's physical assembly.
Comprehensive list of electrical components with part numbers and descriptions.
| Input Sensitivity | 1.2 V |
|---|---|
| Signal-to-Noise Ratio | 120 dB |
| Type | Mono Power Amplifier |
| Power Output (4 Ohms) | 600 W (20 Hz - 20 kHz, 0.03% THD) |
| Frequency Response | 5 Hz - 100 kHz |
| Input Impedance | 20 kΩ |
| Power Output (8 Ohms) | 300 W (20 Hz - 20 kHz, 0.015% THD) |
Loading...