Need help?Do you have a question about the Marantz MODEL 50 and is the answer not in the manual?
Turns the unit on/off (standby).
Shows various pieces of information.
Receives signals from the remote control unit.
Indicates operation of the protection circuit.
Used to connect headphones.
Selects the input source.
Selects the speaker for audio output.
Adjusts the volume level for the bass.
Adjusts the volume level for the treble.
Adjusts the balance of the volume output from the left and right speakers.
Adjusts the volume level.
Used to connect the power cord.
Used to connect devices with analog audio output connectors.
Used to connect the ground wire of a turntable.
Used to connect speakers.
Used to connect the input connector of a recorder.
Use to add equipment like a power amplifier or subwoofer.
Used to connect a pre-amplifier when used as a power amplifier.
Used to connect to compatible Marantz audio devices for remote control.
Switches remote control operation between external and internal sensors.
Transmits signals from the remote control unit.
Selects the input source for playback.
Temporarily turns off the audio output.
Turns the unit on/off and manages auto standby.
Enables or disables source direct mode for higher sound quality.
Adjusts the audio volume level.
Adjusts the brightness of the unit's display.
Identifies necessary cables for device connections.
Instructions for connecting speakers, including impedance guidelines.
Guides for connecting multiple speaker sets and bi-wiring.
How to connect a subwoofer using a subwoofer cable.
Connects playback devices (turntables, CD players) and recording devices.
Connects external pre-amplifiers or power amplifiers.
Connects devices for remote operation without visual contact or between Marantz units.
Procedure for connecting the power cord to the unit and outlet.
Turning the unit on and switching to standby mode.
Selecting speakers, input sources, and adjusting volume.
Muting, tone/balance adjustment, source direct mode, and CD playback.
Using the unit as a power amplifier and recording audio.
Adjusts the display brightness across four levels.
Configures the unit to automatically switch to standby mode.
Configures remote control codes for unit and remote compatibility.
Provides guidance on tone adjustment, sound fidelity, display, and speaker connections.
Initial checks and guidance for resolving operational problems.
Diagnoses problems related to power not turning on or turning off automatically.
Addresses problems with remote control functionality, batteries, and interference.
Resolves issues with the display not showing anything or no sound output.
Troubleshoots problems with specific speakers, subwoofer, and stereo balance.
Addresses distortion, humming noise, and howling phenomena during playback.
Defines key terms like Source Direct, Speaker Impedance, and Protection Circuit.
Lists detailed technical specifications for the unit's performance.
Provides physical dimensions and weight of the unit.
To Next Page
General
