Marantz MODEL 50 - Audio Output and Input Configuration

Selecting the speakers for audio output
1
Turn the SPEAKERS selector knob on the main unit to
select the speaker system to be used for playback.
SPEAKERS A
(Default):
Outputs audio from speakers A only.
SPEAKERS B: Outputs audio from speakers B only.
SPEAKERS A+B:
Outputs audio from both speakers A
and speakers B.
SPEAKERS OFF: No audio is output from the speakers.
Selecting the input source
1
Use INPUT ml to select the input source to be played
back.
The selected input source appears on the display.
0
You can also select the input source by turning INPUT selector on the main unit.
Adjusting the volume
1
Use VOLUME no to adjust the volume.
The volume level appears on the display.
0
You can also adjust the volume by turning VOLUME on the main unit.
Contents Connections Playback Settings Tips Appendix
27
Front panel Rear panel
Remote control
unit
Index