EasyManua.ls Logo

Marantz MODEL 50 - Display and Sound Issues

Marantz MODEL 50
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display on this unit shows nothing
Display is off.
0
Press the DIMMER button, and change the setting to anything other than off. (v p. 31)
No sound comes out
No sound comes out of speakers.
0
Check the connections for all devices. (v p. 13)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 14)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 14)
0
Check that the proper input source is selected. (v p. 27)
0
The volume is set to the minimum level. Adjust the volume to a suitable level. (v p. 27)
0
Cancel the muting mode. (v p. 28)
0
Make sure that the settings for the speakers that output audio are appropriate. (v p. 27)
Contents
Connections Playback Settings Tips Appendix
41
Front panel Rear panel
Remote control
unit
Index

Related product manuals