Marantz AMP10 - External Control and Triggering

Connecting an external control device
AMP CONTROL jacks
You can connect this unit to a Marantz AV 10 Preamplifier with an AMP
CONTROL jack using the included control cable and perform the following
operations for both units simultaneously.
0
When the power of the preamplifier is turned on or placed on standby,
the power of this unit is turned on or placed on standby too.
0
When the brightness of the preamplifier’s display is adjusted, the same
setting is applied to the illumination of this unit
This unit
[Example] AV10
Contents Connections Playback Tips Appendix Specifications
20
Front panel Rear panel Index