o
Audio Device Settings (macOS only)
A
With the unit power off, connect the unit and Mac using a USB cable
(not included).
0
For the connection procedure, refer to the “Connecting a PC or Mac”
section. (v p. 28)
B
Press CD X.
C
Press USB-DAC to switch the input source to “USB-DAC”.
D
Move the cursor to “Go” on the computer screen, and then click
“Utilities”.
0
The utility list is displayed.
E
Double-click “Audio MIDI Setup”.
0
The “Audio Devices” window is displayed.
F
Secondary click on “CD 50n”, and then check that “Use This Device For
Sound Output” is checked.
0
If a different device is checked, select and secondary click on “CD
50n”, and then select “Use This Device For Sound Output”.
Contents
Connections Playback Settings Tips Appendix
80
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
