1
1. TECHNICAL SPECIFICATIONS
Audio characteristics
Channels ........................................................... 2 channels
Frequency response.................................... 2 Hz to 20 kHz
Dynamic range ........................................................ 100 dB
Signal-to-noise ratio ................................................ 110 dB
Channel separation .....................................100 dB (1 kHz)
Harmonic distortion .................................. 0.0025% (1 kHz)
Wow & fl utter .........................................Precision of quartz
Error correction system ................... Cross-interleave Reed
Solomon code (CIRC)
Audio output .............................................2.0 V rms, stereo
Headphone output.... 18 mW/32 ohms (variable maximum)
Digital output
Coaxial output (pin jack) ........................0.5 Vp-p, 75 ohm
Optical output (square optical connector) ........... -19 dBm
Optical readout system
Laser .............................................. AlGaAs semiconductor
Wavelength..............................................................780 nm
Signal system
Sampling frequency...............................................44.1 kHz
Quantization ....................................... 16-bit linear/channel
Power supply
F version............................................. AC 100 V 50 /60 Hz
L version................................................... AC 110 V 60 Hz
N, T version ............................................... AC 230 V 50 Hz
U version ................................................... AC 120 V 60 Hz
Power consumption.....................................................12 W
Cabinet, etc.
Maximum dimensions.......... 440(W) x 89(H) x 317 (D) mm
17-5/16(W) x 3-1/2(H) x 12-1/2 (D) in
Weight .......................................................................3.7 kg
8.14 Ibs
Allowable operating temperature.....................+5 to +35 °C
Allowable operating humidity..5 to 90 % (no condensation)