Marantz CD6003 User Manual

5
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
ENGLISH
NAMES AND FUNCTIONS
REMOTE CONTROLLER
¤4
¤2
⁄8
.
⁄0
⁄1
v
m
⁄9
⁄4
⁄5
¤1
¤0
⁄6
x
c
,
⁄7
¤3
⁄2
z
⁄3
n
b
z POWER button
This is used to switch the unit’s power ON and
STANDBY. (See page 7)
x A-B (A-B repeat) button
This is used to set start point (A) and end point (B)
when a particular section is to be played repeatedly.
(See page 9, 15)
c CANCEL button
This is used to cancel the programmed tracks. (See
page 11, 12, 19)
v RANDOM button
This is used to play the tracks in a random sequence.
(See page 10)
b SCROLL/RECALL button
This is used to scroll the text display when text is
displayed.
When it is pressed during program play, it is possible
to check which tracks have been programmed. (See
page 12)
n TEXT button
This is used to switch the main display from the
time display to the text display. (See page 12, 14)
m TIME button
This switches the main display from the text display
to the time display.
It can also switch the time display during play. (See
page 9)
CD:
It can display how much time has elapsed and how
much play time remains for the current track as well
as how much play time remains for the whole disc.
MP3/WMA/AAC:
The elapsed time and time remaining for the fi le can
be displayed.
, 5, ∞ (VOLUME) button
%, fi (INPUT) button
MUTE button
These are used to operate the corresponding
functions of a Marantz integrated amplifier. For
each function, refer to User Guide supplied with the
Integrated Amplifi er.
. Q. REPLAY button
Jump back a set time before the current playing
position and resume play. (See page 10)
⁄0 8 button
See page 7.
⁄1 7 button
See page 7.
⁄2 ENTER button
Saves the current settings.
⁄3 MENU button
This button displays the various settings.
⁄4 Numeric buttons
See page 7.
⁄5 1, ¡ buttons
See page 7.
⁄6 4, ¢ buttons
See page 7.
⁄7 3 button
See page 7.
⁄8 REPEAT button
This is used to play one track or all the tracks on the
disc repeatedly. (See page 9, 15, 17)
⁄9 +, RESET, – buttons
These are used to adjust the play speed (pitch) with
a ±12 step. (Audio CD only) (See page 13)
These buttons are also used to select MP3/WMA/
AAC folders. (See page 14)
These buttons are used for USB folder search and
iPod album selection.
¤0 DISPLAY button
Press this button when switching the display ON
and OFF.
The display becomes dimmer each time the button
is pressed. When the button is pressed for the third
time, the display turns off and the DISPLAY OFF
indicator lights up. The last setting is retained even
if the power is turned off.
¤1 PROGRAM button
This is pressed to initiate program play.
(See page 11)
¤2 AMS button
This is used to play the intros of all the tracks
in sequence starting from the fi rst track for the
duration equivalent to the setting.
(See page 10)
¤3 SOUND MODE button
This is used to switch Audio EX mode (See page
13), and to set use of pitch control (See page 13).
¤4 0 button
See page 7.
CD6003N01Eng.indd5CD6003N01Eng.indd5 09.5.294:00:13PM09.5.294:00:13PM

Marantz CD6003 Specifications

General

Frequency range	2 - 20000 Hz
Audio formats supported	AAC, MP3, WMA
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.002 %
CD-RW playback	Yes
CD changer	-
Device type	Personal CD player
Cassette deck	No
Product color	Gold, Silver
Channels quantity	2 channels
Disc loading type	Tray
Remote control type	RC002CD
Display type	LCD
Volume control	Rotary
Programmable tracks	30
USB 2.0 ports quantity	1
Power consumption (standby)	0.3 W
Power consumption (typical)	19 W

Weight and Dimensions

Depth	339 mm
Width	440 mm
Height	106 mm
Weight	7000 g