Marantz Consolette - Page 51

24
Setting the clock (Clock)
Setting the Summer Time
(Summer Time)
Use the following procedure to set Summer time if the Summer time
system is used in your country.
1
Press FUNCTION repeatedly until
“Menu” is displayed.
“Menu” is displayed, then “Language”
menu appears.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Clock”,
then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Clock
3
Turn GYRO to select “Summer Time(Off)”, then
press ENTER.
Summer Time(Off)
4
Turn GYRO to select “Off(0H)” or “On(+1H)”, then
press ENTER.
The “Summer Time” menu is displayed again.
n Exiting the menu to return to the normal mode
Press FUNCTION.
•If you press FUNCTION before pressing ENTER, the setting is
cancelled.
Setting the current time
(Auto Adjust Now)
When the unit is connected to the Internet, the current time is set
automatically.
1
Press FUNCTION repeatedly until
“Menu” is displayed.
“Menu” is displayed, then “Language”
menu appears.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Clock”,
then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Clock
3
Turn GYRO to select “Auto Adjust Now”, then press
ENTER.
The operation to receive the current time starts.
Auto Adjust Now
•The current time is displayed for several seconds when it is
received successfully.
•If the current time is not received successfully, “Failed” appears.
n Exiting the menu to return to the normal mode
Press FUNCTION.
•If you press FUNCTION before pressing ENTER, the setting is
cancelled.
Setting the current time (Manual Adjust)
(12-Hour Display)
When the unit is not connected to the Internet, set the current time
manually.
1
Press FUNCTION repeatedly until
“Menu” is displayed.
“Menu” is displayed, then “Language”
menu appears.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Clock”,
then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Clock
3
Turn GYRO to select “Manual Adjust”, then press
ENTER.
Manual Adjust
4
Turn GYRO to set the “hours”, then press ENTER.
5
Turn GYRO to set the “minutes”, then press ENTER.
The current time is set.
If you use “Manual Adjust” to set the time, “Auto Adjust” is set to
“Off”.
n Exiting the menu to return to the normal mode
Press FUNCTION.
•If you press FUNCTION before pressing ENTER, the setting is
cancelled.
Preparations
Operations
Informations
Operations