Need help?Do you have a question about the Marantz pmd325 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Frequency Response | 20 Hz to 20 kHz |
| Output Level | 2.0 V RMS |
| Digital outputs | Coaxial, Optical |
| Disc formats | CD, CD-R |
| Power Supply | AC 120V, 230V (switchable) |
Detailed cautions regarding electric shock, laser safety, and potential radiation exposure.
Precautions to prevent fire, protect from moisture, and ensure correct plug insertion.
Covers safe operation, cleaning, and handling practices for the product.
Guidelines for proper installation, ventilation, and avoiding hazardous environmental conditions.
Addresses power sources, grounding, servicing procedures, and replacement parts.
Information on antenna grounding procedures and FCC compliance for interference management.
Introduces product warnings, CE marking, and setup considerations.
Provides essential advice for installing the unit and general operating precautions.
Key steps to follow before connecting the player to other components.
Instructions on proper disc handling, cleaning, and choosing an appropriate installation location.
Guidance on unit orientation and environmental considerations for optimal performance.
Safety advice on handling power cords, limitations on self-repair, and battery precautions.
Precautions against condensation and potential interference with other electronic devices.
Lists all included accessories and how to verify their presence.
Explains how to use the remote control, its operational range, and basic precautions.
Highlights support for CD-R/RW, MP3 files, and CD-TEXT display capabilities.
Details features like Quick Replay, End Monitor, Auto Cue, Pitch Control, and external interfaces.
Guides on connecting analog unbalanced and balanced audio outputs to an amplifier.
Instructions for connecting digital audio components using various output types.
Describes the power switch, disc tray operation, and primary playback buttons.
Explains the main display and headphone jack with level control.
Details indicators for general display, CD-TEXT, and playback modes like RNDM, PROG.
Explains indicators related to track numbers, time displays, and MP3 file status.
Covers buttons for track selection, playback modes, and programmed playback.
Explains buttons for TEXT, MENU, PITCH, DISPLAY, and Quick Replay.
Describes rear panel ports for audio outputs, remote control, and external interfaces.
Details analog balanced output, level control, CONTROL I/O, and RS-232C connectors.
Explains digital balanced output and AC power connection procedures.
Step-by-step guide to initiating, stopping, and temporarily pausing CD playback.
Instructions on how to load a CD into the tray and remove it after playback.
How to select tracks directly or skip between them using buttons or the jog dial.
Using index points to navigate within tracks or search specific parts.
Features for replaying recent sections or monitoring the end of a track.
How to set playback to repeat all tracks, a single track, or a specific section.
Instructions for playing tracks randomly or using Auto Music Scan.
How to skip or return to tracks while random playback is active.
How to create custom playback sequences using track numbers or CD-TEXT titles.
How to set up playback to skip specific tracks using track numbers or titles.
Procedures for viewing, editing, or canceling programmed track sequences.
How to add more tracks to a program or exit program mode.
How to increase, decrease, or reset the playback speed (pitch).
Steps for setting a specific playback start point and resuming from it.
Guide to accessing and navigating the play function menus using the EASY JOG dial.
How to select various playback modes like Single Play, Auto Cue, and Repeat.
Detailed steps for adjusting the playback pitch using EASY JOG or the remote control.
How to set and use Single Recue, Single Next, and Single Stop playback modes.
Steps to activate Auto Cue for skipping blanks and setting Repeat modes.
How to configure program playback, random sequence, and track deletion.
How to set the time durations for AMS and Quick Replay features.
How to configure the Quick Replay button and enable Timer Play functionality.
Setting auto pause/play at track beginnings and selecting time display formats.
How to select and display CD-TEXT or ID3 tag information.
How to enable the End Warning indicator and prevent accidental tray opening.
How to enable Key Lock to prevent button errors and load the MP3 system.
How to enable auto MP3 loading and restore factory default settings.
Explains the last memory feature and how to display CD-TEXT information.
Information on playing CD-R/CD-RW discs and MP3 files, including album selection.
Precautions for MP3 discs and a list of functions not supported with MP3 files.
Describes how random play operates with MP3 files and folder structures.
How to use CONTROL I/O and RS-232C connectors for external control and data transmission.
Details RS-232C physical specifications and command/status transmission methods.
How to use fader start for playback control and a list of remote control command codes.
Pinout for RS-232C, cable requirements, and data packet structure.
Step-by-step instructions for attaching the rack-mounting kit to the unit.
Provides helpful advice for a secure and level installation of the rack-mount kit.
Covers system, audio characteristics, digital outputs, and signal system specs.
Details control interfaces, power supply, cabinet dimensions, weight, and environment.
Solutions for common problems like disc errors, no sound, or playback interruptions.
Steps to fix remote control issues and problems with CD-R/RW and MP3 disc compatibility.
Details what the limited warranty covers, exclusions, and duration.
Instructions for getting service and information on warranty limitations and state law rights.
To Next Page
