8
10. When the updatiing is fi nished, information of Compact-
Flash is displayed on LCD.
11. Turn off POWER switch.
The fi rmware has been updated. Do the next procedure.
12. Connect Windows PC and PMD670 with USB cable
13. Repeat the same procedure No1., No2. and No3.
14. "pmd_prog.bin" which wrote it in the Removable
Disk(CompactFlash) is delete from the Windows PC.
NOTICE :
When "pmd_prog.bin" isn't delete from the compacFlash,
The set becomes the mode of update of fi rmware every
time to turn on the unit.
15. Disconnect USB cable from the PMD670, then turn off
POWER switch.
16. Check the version number of the fi rmware
Refer to 2-page "SERVICE MODE" for "Micro-Processor
Version check" confi rmation.
To Next Page
Loading...
