8
10. When the updatiing is fi nished, information of Compact-
Flash is displayed on LCD.
11. Turn off POWER switch.
The fi rmware has been updated. Do the next procedure.
12. Connect Windows PC and PMD671 with USB cable
13. Repeat the same procedure No1., No2. and No3.
14. "pmd_prog.bin" which wrote it in the Removable
Disk(CompactFlash) is delete.
NOTICE :
When "pmd_prog.bin" isn't delete from the compacFlash,
The set becomes the mode of update of fi rmware every
time to turn on the unit.
15. Disconnect USB cable from the PMD671, then turn off
POWER switch.
16. Check the version number of the fi rmware
Refer to 2-page "SERVICE MODE" for "Micro-Proces-
sor Version check" confi rmation.
10
ƖƑƕኳǘǔƱȇǣǹȗȬǤƴǫȸȉإƕᘙᅆƞǕ
LJƢŵ
11
PMD671
ƷᩓเǛЏǓLJƢŵ
ˌɥưƖƑ˺ಅƸኳʕưƢŵ
ƭƮƚƯŴ
pmd_prog.bin
ƷЪᨊ˺ಅƠLJƢŵ
12
USB
DZȸȖȫǛዓƠLJƢŵ
13
ϐࡇŴɥᚡ
1
Ŵ
2
Ŵ
3
Ʒદ˺ǛƠLJƢŵ
14
ȪȠȸȐȖȫȇǣǹǯ
CompactFlash)
ϋƴƖᡂǜƩ
pmd_prog.bin
ǛЪᨊƠLJƢŵ
දƜƷદ˺ǛƠƳƍƱ
PMD671
ƷᩓเλǕƨŴׅ
fi rmware
ƷƖƑѣ˺ƴλƬƯƠLJƍLJƢŵ
15
PMD671
ƷᩓเǛЏǓ
USB
DZȸȖȫǛٳƠLJƢŵ
16.VERSION
ƷᄩᛐǛƠLJƢŵ
2
ȚȸǸ
"B. SERVICE
Ȣȸȉ
"
Ʒ
"
1. VERSION
ᄩᛐ
"
ư
ᄩᛐǛƠLJƢŵ
17
ƖᡂǜƩ
fi rmware
ƷȐȸǸȧȳƕദƠƚǕƹƖƑܦ
ʕưƢŵ