User Guide
29
Reference
Hard buttons can be programmed for a device specific command
for a particular device on the remote (Programming locally).
Only via PC, hard buttons can be programmed with a grobal
function for all devices.
When a command is taught to a hard button from a device page,
it will only be issued when that device is active, even if a command
has been programmed globally. Local learning overrides global
programming.
For example: One could program the CH+ & CH- buttons as the
Chapter +/- command when the DVD is active. Now, if you program
the TV channel +/- globally (and any device other than the DVD is
selected) the TV channel +/- commands will be issued.
Programming a Hard Button Locally
1 Switch to the device for which you want to program the button.
2 Complete steps 1 to 9 in the programming Touch Screen
buttons on page 27 to 28. Instead of tapping a button on the
Touch Screen, press the button you want to program.
To Next Page
Loading...
